OPEN THE DOOR TO INNOVATION
ELEVATOR SYSTEMS - Emergency communication devices for any lift.
Dual Sim GATEWAY 3
Lift1 5
LIFT 8 Lift8 9
SOFTWARE 15
INDUCTION LOOP FOR LIFTS 17
Lift ACCESSORIES 18
TABLE OF CONTENTS
3G Dual Sim GATEWAY
2N® Easygate Dual Sim is light weight, compact & quick to install. Designed for the lift environment & to connect Australia’s elevators to the digital network, due to the nbn™.
RCM approved
Repsonsible Supplier No. E7158
Self testing & reporting in accordance with EN: 81-28
Land-line & nbn™ replacement
Easy installation external fixing bracket Monitoring by SMS report
Easy battery replacement
Dual Sim Gateway
Item No. 5013681LAU
Installation
3G Dual Sim GATEWAY
Technical Specifications
MACHINE ROOM SHAFT
ANY LIFT
COMMUNICATOR
CABIN
PRO
2N® EASY GATE
4X AA
BATTERIES
(NmHi)
DISPATCHER/SUPERVISOR
SERVICE CAR
Lift1 Emergency Elevator Telephones
Precision communication products for safety of passengers and lift technicians.
Fully powered over phone line/via gateway RCM approved
Lift1
CABIN UNIT COP
COP version - Internal Speaker & Microphone
Item No. 919640AU
COP version - External Speaker & Microphone
Item No. 919640XAU
Lift1
CABIN UNIT SURFACE MOUNT
With button
Item No. 919645AU
Without button
Item No. 919645WBAU
Lift1
CABIN UNIT TOC
With Voice alarm station switch
Item No. 919631AU
Without Voice alarm station switch
Item No. 919630AU
Lift1
CABIN UNIT FLUSH MOUNT
With button
Item No. 919618BAU
Without button
Item No. 919618AU
Lift1
Lift1 VOICE ALARM STATION SET
For top and under cabin
Item No. 913661ESET
Lift1 MACHINE ROOM STATION SET
Machine room unit
Item No. 919654ESET
Lift1 Emergency Telephones
Installation Technical Specifications
PRO
4X AA BATTERIES
(NmHi)
MR PHONE
MACHINE ROOM SHAFT
2N® LIFT1
CABIN
2N® EASY GATE
DISPATCHER/SUPERVISOR
SERVICE CAR
8
Lift8
A highly modular lift communication system, where the two-wire bus makes the Lift8 readily installable in any lift context.
This means that when it comes to installing emergency lift communications for multi lift buildings, new cabling is not required.
2 wire bus in shaft including power Comprehensive, modular, expandable Wide range of communication interfaces
Lift8
CABIN UNIT COP
COP version - fixed
Item No. 918600E
COP version - wired
Item No. 919640XE
Lift8
CABIN UNIT SURACE MOUNT
With button
Item No. 918613E
Without button
Item No. 918613WBE
Lift8
MACHINE ROOM PCB
For MRL elevators
Item No. 918619E
Lift8
CABIN UNIT FLUSH MOUNT
With button
Item No. 918618BE
Without button
Item No. 918613WBE
Lift8
Lift8
MACHINE ROOM UNIT Lift8
SHAFT UNIT Lift8
SHAFT UNIT ANTIVANDAL Lift8 SPLITTER Lift8 I/O MODUL
MR unit + programming
Top, under cabin or pit
For heavy duty environment
Shaft extender
For easy lift monitoring
Item No. 918611E Item No. 918612E Item No. 918617E Item No. 918620E Item No. 918621E
Lift8
Lift8
CAMERA MODULE
For visual alarm confirmation
Item No. 918622E
Lift8 PICTOGRAM CONTROLLER
External pictogram driver
Item No. 918655E
Lift8 VOICE ALARM STATION SET
For top and under cabin
Item No. 913662ESET
Lift8
Lift8
CENTRAL UNIT
Item No. 918600E
Maxi
Item No. 918601E
Communication interface
Monitoring interface
Lift8 PSTN
Item No. 918652E
Lift8 UMTS
Item No. 918651E
Lift8 VOIP
Item No. 918653E
Lift8 RS232
Item No. 918654E
2N®Lift8 IP
Item No. 918655E
Installation Technical Specifications
Lift8
LIFT8
2N® LIFT8
CENTRAL UNIT
ENGINE ROOM
6
/ UMTS/VOIP
LIFT8
Central unit
Power 100 - 240 V; 50/60 Hz; 0.75 A; 60 W max.
Backup power supply Built-in lead acid battery
Connection options 4 reporting units + 7 splitters + 8 I/O modules Maximum distance between the splitters 100 m
Control-room connection interface UMTS / VoIP
Configuration and monitoring Voice menu / USB / remote
SHAFT 1
2
2
/
UP TO 8 WELLS
2N® LIFT8 SPLITER
ENGINE ROOM
SHAFT 8
2
2
/
DISPATCHER/SUPERVISOR
Status indicators 5× LED, three-colour
Dimensions and weight 300×170×72 mm, 2.7 kg
Splitter 10 to 20 V, 25 to 50 Hz
Power 24 V from a central or local unit
Capacity 4 reporting units + camera module
Maximum total shaft cable length 600 m
Lift blocker output Relay, NO and NC contacts
Dimensions 142×98×34 mm
Reporting units 9V AC or DC
Link to splitter 2 wires for power, voice and data
Inputs for buttons and signals ALARM1, ALARM2, CANCEL
LED signalling Connecting, Connection confirmed
CAR
Option to hook up an external microphone, speaker and LED
Yes, on the cabin reporting unit
CAR
Numeric keypad, system configuration option Yes, on the machine room reporting unit
2
/ 2
/
2N® LIFT8 FIREMAN
Option to connect an earpiece in noisy circumstances
Yes, in the machine room and shaft reporting units
2N® LIFT8
SHAFT ANTIVANDAL
In-shaft visibility Yes, backlit buttons
I/O Module 200 mA
Power 24 V from a central or local unit
Capacity 4 inputs + 4 outputs
Inputs Galvanically isolated, 12 - 24 V AC or DC
Outputs Relay, contacts Normally-Open (NO), max. 250 V, 5 A
Dimensions 142×98×34 mm
14
Lift SOFTWARE
Call Centre for Lifts is a software solution for the comprehensive management of emergency lift telephones.
The software will even allow you to handle alarms and control calls. It provides a detailed overview of all your calls from the elevator and the option to archive or export the data e.g. for customer reports.
This software can also be used to receive reports on the status of the line between the Lift 1 elevator emergency phones and the gateway.
Management of control and alarm calls No extra hardware required
Support for CPC and P100 protocols
Line check call capability with Lift 1 Emergency Telephones
CALL CENTRE FOR LIFTS
Item No. 918700E
Lift SOFTWARE
Lift8 SERVICE TOOL Lift1 SERVICE TOOL
The Lift8 Service Tool is software used for local (USB) or remote (IP) configuration of one complete Lift8 communication system (audio messages, additional modules, splitters and I/O modules).
With the aid of Lift1 Service Tool software for Windows Professional, you will be able to completely set up the
Lift1 emergency telephone. In addition, the software application can be used to
configure & install an upgrade.
INDUCTION LOOP FOR LIFTS
Emergency lift communication for the hearing-impaired.
The Induction Loop is an inductive loop that delivers audio to the lift-cabin interior, where it transmits the sound to hearing aids with a built-in inductive sensor.
The induction loop is an indispensable assistant in resolving emergency communications from inside the lift for hearing aid users.
Connect to any lift communicator
Take advantage of two independent audio inputs
Cover the lift space with a signal for the hearing-impaired
INDUCTION LOOP AMPLIFIER WITH ANTENNA
Item No. 919622E
Lift ACCESSORIES Certification
ACMA approved
Responsible Supplier No. E7158 AS/NZS 60950.1.2011 A1:1.2012 AS/CA S002:2010. A1:2012 AS/CA S003.1:2010. A1: 2012 AS/CAQ S004: 2013
AS/CA S042.1: 2015
AS/ACIF S042.3: 2005
AS/CA S042.4: 2015
Authorised 2N Partner
TÜV SÜD Certified
All emergency communication products are certified by TÜV SÜD Czech. The TÜV certifficates confirm compliance with EN81-28, EN 81-70, EN81-72 and EN81-80.
ELEVATOR NORMS
EN 81-28 – Emergency calls. The purpose of this standard is to improve communication in emergency situations in elevators.It eliminates the risk of passengers being entrapped due to malfunctions in elevator installation.This is accomplished by fitting all elevators with an emergency call system. This alarm system must be capable of establishing a
two-way voice communication between people in an elevator cabin and a remote emergency (rescue) service. The EN 81-28 standard thus applies to all new and modernized elevators.
EN 81-70 – Barrier free elevators. EN 81-70 defines the minimum requirements for safe independent access and use of elevators by all passengers, including those with disabilities. It provides guidelines on how to best improve the accessibility on the approach to elevators, within elevator cars and while exiting elevators. This standard allows people with reduced mobility (pushchairs, wheelchairs, walking aids, etc.) or other disabilities (mental disability,
sight and hearing impairment, etc.) to enter elevator cabins easily and operate elevators without limitations.
EN 81-72 deals with the significant hazards, hazardous situations and events relevant to firefighter elevators installed mostly in new buildings. They are primarily intended for use by passengers and thus may be used for firefighting and evacuation purposes
under direct control of firefighters. These elevators can only operate within a protected environment. They are designed with additional protection, controls and signals enabling rescue from inside or outside elevator cars in case of fire.
ELEVATOR NORMS
EN 81-20 replaces the EN 81-1 standard and specifies the emergency call system requirements in greater detail. Lifts must now be equipped with additional communication units. Additional equipment must be installed with the ALARM system under the EN 81-28 standard to allow a person trapped in the shaft to place an emergency call. This must be accessible from locations where the risk of a person being trapped exists.
EN 81-71 – Vandal resistant elevators. The EN 81-71 standard defines the testing methodology and classification of elevators according to their vandal resistance. It entails special protective measures and security rules against acts that may result in damage to elevators or injury to passengers. Furthermore, this standard provides guidance to building designers, customers, etc., and requirements for design in projects requiring additional security in order to protect against the risk of vandalism.
EN 81-80 – Elevator modernization / hazard analysis. EN81-80 SNEL (Safety Norm for Existing Lifts) improves the security of existing passenger and goods passenger elevators. The aim is to match the level of safety achieved by newly installed elevators. This standard defines rules for improving safety of existing
elevators based on risk assessment and categorises various hazards and hazardous situations. It also lists corrective actions that can be implemented to progressively improve safety.
ELEFONE MONITORING PTY LTD
www.elefone.com.au 02 8860 9552
admin@elefone.com.au
Level 5, Nexus Building, 4 Columbia Court,
Norwest, NSW 2153 Australia
Access 2019 Edition 1